Specification
| SIZE, SHAPE AND CONFIGURATION |
|
| Width – Depth – Height |
2000 x 2000 x 930 mm
|
| Total Positions |
6
|
| Lounger |
1
|
| Seats |
5
|
| Dry Weight |
460kg
|
| ELECTRICAL |
|
| Required Amperage Feed * |
13A Low – 25A High
|
| Power |
220V / 50Hz
|
| Heater Rating |
2 KW / 220 – 240V
|
| PUMPS |
|
| Dedicated Energy Efficient Circulation Pump |
0
|
| Massage Boost Pump |
0
|
| Twin Speed Filter / Massage Boost Pump |
1 x 3hp
|
| JETS |
|
| Total Jets |
29
|
| 2 inch Direct Jet |
2
|
| 3.5 inch Direct Jet |
13
|
| 3.5 inch Pure Inner Jet |
6
|
| 5 inch Direct Jet |
0
|
| 5 inch Twin Rotatonal Jet |
3
|
| 5 inch Pure Inner Jet |
5
|
| 7 inch Power Jet |
0
|
| CONTROL SYSTEM |
|
| Gecko Control Box |
in.yj 2
|
| Gecko Control Pad |
k 300
|
| 2 inch Variable Massage Boost Selector Illuminated |
1
|
| 1 inch Venturi Air inlet Regulator Illuminated |
2
|
| ENTERTAINMENT AND COMFORT |
|
| Bluetooth Audio Receiver |
1
|
| Corner Mounted Pop-up Speaker |
2
|
| Integrated Ice Bucket |
1
|
| E.V.A Cushioned Headrest |
4
|
| HALO L.E.D MOOD LIGHTING SYSTEM |
|
| Exterior Cabinet Corners |
Yes
|
| Cup Holders |
Yes
|
| 5 inch Footwell Light |
Yes
|
| Water and Air Controls |
Yes
|
| Internal Shell Perimeter Lighting |
No
|
| 3″ – 5″ and 5.5″ Jet Internals |
Yes
|
| Hydro Shear Waterfall |
Yes
|
| Hydro Flow Fountains |
Yes
|
| SANITATION AND FILTRATION |
|
| Remay Fabric Filtration Cartridge |
1
|
| Corona Discharge Water Purification Ozone Generator 200mg / h |
1
|
| CABINET AND BASE |
|
| A.B.S Tough Base Protection |
Yes
|
| Synthetic Composite Cabinet Panelling – Coastal Grey |
Yes
|
| Stainless Steel Ridged Frame |
Yes
|
| Exterior Drain Access Point |
Yes
|
| INSULATION |
|
| A.B.I Heat Lock System to Base and Cabinet |
Yes
|
| Thermal Vinyl Cover with Security Clips |
Included with install pack
|
*Required Amperage Feed
If you are using a LOW amperage feed, the pumps will not work with the heater. If you turn on the pumps, the heater will switch off. This will cause a little decrease in temperature (especially in the colder seasons) but only by approx. 1 degree.
If you are using a HIGH amperage feed, all pumps will work with the heater. The benefit of this is it will keep your water temperature topped up, especially in the colder seasons.
Finance Calculator
To apply for finance please add your chosen product to the basket and then select finance at the checkout.
