Specification
| SIZE, SHAPE AND CONFIGURATION |
|
| Width – Depth – Height |
2000 x 2000 x 930 mm
|
| Total Positions |
6
|
| Lounger |
1
|
| Seats |
5
|
| Dry Weight |
460kg
|
| ELECTRICAL |
|
| Required Amperage Feed * |
13A Low – 25A High
|
| Power |
220V / 50Hz
|
| Heater Rating |
2 KW / 220 – 240V
|
| PUMPS |
|
| Dedicated Energy Efficient Circulation Pump |
0
|
| Massage Boost Pump |
0
|
| Twin Speed Filter / Massage Boost Pump |
1 x 3hp
|
| JETS |
|
| Total Jets |
29
|
| 2 inch Direct Jet |
2
|
| 3.5 inch Direct Jet |
13
|
| 3.5 inch Pure Inner Jet |
6
|
| 5 inch Direct Jet |
0
|
| 5 inch Twin Rotatonal Jet |
3
|
| 5 inch Pure Inner Jet |
5
|
| 7 inch Power Jet |
0
|
| CONTROL SYSTEM |
|
| Gecko Control Box |
in.yj 2
|
| Gecko Control Pad |
k 300
|
| 2 inch Variable Massage Boost Selector Illuminated |
1
|
| 1 inch Venturi Air inlet Regulator Illuminated |
2
|
| ENTERTAINMENT AND COMFORT |
|
| Bluetooth Audio Receiver |
1
|
| Corner Mounted Pop-up Speaker |
2
|
| Integrated Ice Bucket |
1
|
| E.V.A Cushioned Headrest |
4
|
| HALO L.E.D MOOD LIGHTING SYSTEM |
|
| Exterior Cabinet Corners |
Yes
|
| Cup Holders |
Yes
|
| 5 inch Footwell Light |
Yes
|
| Water and Air Controls |
Yes
|
| Internal Shell Perimeter Lighting |
No
|
| 3″ – 5″ and 5.5″ Jet Internals |
Yes
|
| Hydro Shear Waterfall |
Yes
|
| Hydro Flow Fountains |
Yes
|
| SANITATION AND FILTRATION |
|
| Remay Fabric Filtration Cartridge |
1
|
| Corona Discharge Water Purification Ozone Generator 200mg / h |
1
|
| CABINET AND BASE |
|
| A.B.S Tough Base Protection |
Yes
|
| Synthetic Composite Cabinet Panelling – Coastal Grey |
Yes
|
| Stainless Steel Ridged Frame |
Yes
|
| Exterior Drain Access Point |
Yes
|
| INSULATION |
|
| A.B.I Heat Lock System to Base and Cabinet |
Yes
|
| Thermal Vinyl Cover with Security Clips |
Included with install pack
|
*Required Amperage Feed
If you are using a LOW amperage feed, the pumps will not work with the heater. If you turn on the pumps, the heater will switch off. This will cause a little decrease in temperature (especially in the colder seasons) but only by approx. 1 degree.
If you are using a HIGH amperage feed, all pumps will work with the heater. The benefit of this is it will keep your water temperature topped up, especially in the colder seasons.
