ATLANTIC
£9,999.00
SSP £9999
* Colour images are for representation purpose only.
For the full specification on this model and additional options and upgrades please review the specification table below.
Additional information
Colour | Midnight Canyon, Sterling Silver, Odyssey |
---|
Specification
SIZE, SHAPE & CONFIGURATION | |
Width – Depth – Height |
2300 x 2200 x 940mm |
Total Positions |
6 |
Lounger |
1 |
Seats |
5 |
Dry Weight |
405kg |
ELECTRICAL | |
Required Amperage Feed* |
32A Low – 48A High |
Power |
220V / 50HZ |
Heater Rating |
3KW / 220 – 240V |
PUMPS | |
Dedicated Energy Efficient Circulation Pump |
1 x 0.5hp |
Massage Boost Pump |
3 x 3hp |
Twin Speed Filter / Massage Boost Pump |
0 |
JETS | |
Total Jets |
62 |
2 inch Direct Jet |
24 |
3.5 inch Direct Jet |
12 |
3.5 inch Pure Inner Jet |
6 |
5 inch Direct Jet |
6 |
5 inch Twin Rotational Jet |
4 |
5 inch Pure Inner Jet |
8 |
7 inch Power Jet |
2 |
CONTROL SYSTEM | |
Gecko Control Box |
in.ye 5 |
Gecko Control Pad |
k 1000 |
2 inch Variable Massage Boost Selector Illuminated |
2 |
1 inch Venturi Air Inlet Regulator Illuminated |
2 |
ENTERTAINMENT & COMFORT | |
Bluetooth Audio Receiver |
1 |
Surface Mounted Speaker |
2 + Subwoofer |
Integrated Ice Bucket |
1 |
E.V.A Cushioned Headrest |
3 |
HALO L.E.D MOOD LIGHTING SYSTEM | |
Exterior Cabinet Corners |
Yes |
Cup Holders |
Yes |
5 inch Footwell Light |
Yes |
Water and Air Controls |
Yes |
Internal Shell Perimeter Lighting |
Yes |
3″, 5″ and 5.5″ Jet Internals |
Yes |
Hydro Shear Waterfall |
Yes |
Hydro Flow Fountains |
Yes |
Hydrotherapy Liquid Injector |
Yes |
SANITATION & FILTRATION | |
Remay Fabric Filtration Cartridge |
2 |
Corona Discharge Water Purification Ozone Generator 200mg/h |
1 |
CABINET & BASE | |
A.B.S Tough Base Protection |
Yes |
Synthetic Composite Cabinet Panelling – Coastal Grey |
Yes |
Stainless Steel Ridged Frame |
Yes |
Exterior Drain Access Point |
Yes |
INSULATION | |
A.B.I Heat Lock System to Base and Cabinet |
Yes |
Thermal Vinyl Cover with Security Clips |
Included with Install Pack |
*Required Amperage Feed
If you are using a LOW amperage feed, the pumps will not work with the heater. If you turn on the pumps, the heater will switch off. This will cause a little decrease in temperature (especially in the colder seasons) but only by approx. 1 degree.
If you are using a HIGH amperage feed, all pumps will work with the heater. The benefit of this is it will keep your water temperature topped up, especially in the colder seasons.