02392 471 073 info@ukhottubs.co.uk

MARS

MARS

The Mars is well equipped for a small tub: recessed jetting for ultimate comfort, ozone water sanitiser to help reduce the need for Chlorine, LED lighting, two antimicrobial filters giving a total of 50 sq ft filtration and 37 jets etc… This hot tub spa is designed and engineered to provide total comfort and performance. If you are a couple looking for a small tub with two loungers then look no further.

(L) 2130 x (W) 1600 x (H) 750 mm  |  2 Relining Places  |  660 ltrs  |  1 cm Polyfoam Insulation  |  POLI-MAX Reinforced Acrylic Spa | 1 x 2 HP Pump | 37 x Jets | Ozone Sanitation | Gecko Easy 4 Controls | MyMusic Bluetooth Audio | Plug and Play

      

Mars £4499

Includes Free Install Pack worth £545:
Standard Delivery & Commissioning | Thermal Cover | Steps | Chemical Starter Pack

UK Hot Tubs offer a range of finance options, typical examples below:

0% Finance – £87.47 per month

0% Finance example above | 36 month term | Deposit amount = £1350 | Amount to finance £3149 | Interest £0 | Total amount payable £4499 |

Low deposit finance – £92.33 per month

Low deposit finance example above | Cash Price £4499 | 60 month term | Deposit amount = £100 | Amount to finance £4399 | Interest £1141.31 | Total amount payable = £5640.31 | APR 9.9% |

Finance subject to status, terms and conditions apply.

 

General Specifications:

Measurements (L) 2130 x (W) 1600x (H) 750 mm
Sitting Places 2 reclining place
Audio MyMusic Bluetooth Audio included
Insulation Polyfoam 360 Degree 1cm insulation
Controls Gecko Easy 4
Pumps & Jets 2  HP Pump & 37Jets
Sanitiser Ozone Generator
Lights 12 x Colour changing LEDs
Weight / Volume 250 kg / 660 litres

 

RTB insulation

Effective insulation is extremely important for hot tubs in order to reduce running costs to a minimum.

The triple “Reflective Thermal Barrier” (RTB ) insulation of WELLIS spas utilises thermal gains from the spa’s equipment, collecting any waste heat energy and reflecting it back into the plumbing and shell, whilst keeping out the colder outer air.

Insulating Cover

We manufacture all our own covers to ensure consistent quality and the highest level of thermal insulation effectiveness. This helps to keep our customer’s energy costs to a minimum. Our covers include features like a full length hinge buffer seal, internal vapour seal, and a marine grade UV resistant outer cover. The top surface slopes like a house roof so that rain can easily run off.

Wellis Easy 4 Spa Controls

Our new spa control panels make easy work of controlling all the functions in your Spa.
A large screen displays the bathing temperature, and simple fingertip touch pads allow easy adjustment of all the spa’s features including temperature, jets, lighting etc.
The controller systems for the spa and hottub industry are recognised as leaders for innovation, ease of use and reliability.

Every spa model is equipped with a latest generation of solid state panels and controllers which have no moving parts to ensure our spas are super reliable, dependable and easy to operate.

Reinforced Moulded ABS Floor Pan

The insulated one piece moulded floor pan forms the foundation upon which we build our spas. The pan sides extend upwards and form a, moisture and insect proof barrier to protect the spas structure from the detrimental effects of damp ground.
Our reflective barrier insulation system extends across the floor pan to prevent valuable waste heat being drawn through the base by the “cold sink effect” that is created by damp ground.

Dimensions: (L) 2130 x (W) 1600 x (H) 750 mm
System Information:
Power Requirement: 1 x 32A 230V/400V 50Hz optimum
1 x 16A 230V/50Hz minimum
Hydro Massage Pump 2 HP two speed
Circulation Pump LAING water circulation pump (0,1kW)
Heating Unit 2kW/230V/50Hz heater
Control System Gecko Easy 4 Controls
Total number of jets 37
Water Sanitisation Ozone water sanitiser
2 antibacterial filters

 

STANDARD SPECIFICATIONS:

 

Colour Therapy Mood Lighting
Based upon lights of four different colours; Green, Yellow, Blue and Red. These can be set to fade gently throughout the spectrum or fixed on a single colour most beneficial to your mood. This option includes 1 underwater lamp with 55 LEDs.

Thermal Cover
Designed to keep the heat of the spa at the set level, which can save you a lot of energy and money. Thermal insulation is provided by a special foam covered with stylish UV- resistant artificial leather.

 

Spa Shell Colours

 

  

 

Cabinet Colour:

 

 

 

Quality Assurance

Our quality is continuously benchmarked against the highest German production standards un the TUV Certification Protocol that we subscribe to. This ensures we constantly meet and exceed all relevant international quality standards.

   

  

CE Label

On all our products reassures our customers that the design and build meets or exceeds all relevant EU standards

Poli-MAX™Shell

Poli-Max™ shells are a technological triumph, WELLIS have developed an entirely eco-neutral Acrylic/Abs/ polymer laminate system that results in a stronger, lighter, more stable, eco friendly and ultimately bio degradable product. It even self insulates for both heat and sound, significantly lowering running costs as well as making our spas probably the quietest as well as safest for your family you can buy. Ecologically sound product, easily degradable, (unlike fibreglass it does not give off any hazardous styrol gas). Thus it is not classed as hazardous and meets all relevant EU standards.

Effective insulation is extremely important for hot tubs in order to reduce running costs to a minimum. The triple “reflective thermal barrier” insulation of Wellis Spas utilises thermal gains from the spas equipment, collecting any waste heat energy and reflecting it back into the plumbing and shell. whilst keeping out the colder outer air.

The spa heat map picture is an infrared image of a Wellis spa which shows the efficiency of the RTB system. The persons face is red, indicating a high heat loss, whilst the pastel green and blues of the WELLIS spa indicate a very low heat loss as almost all the heat is kept inside the spa and cabinet.

The Wellis Spa produced excellent results in the Heatmap test

The temperature of the water in the spa visible in the picture is 35 °C, while that of the outer covering and the thermal cover is merely 4 °C. The outdoor temperature is -5 °C.

Reinforced moulded ABS floor pan

The insulated one piece moulded floor pan forms the foundation upon which we build our spas.

The pan sides extend upwards and form a moisture and insect proof barrier to protect the spas structure from the detrimental effects of damp ground.

Our reflective barrier insulation system extends across the floor pan to prevent valuable waste heat being drawn through the base by the “cold sink effect” that is created by damp floor.

 

 

WPS (Wellis Polystyrol) cabinet frame immortality for the spa cabinet’s frame

The special polymer ensures exceptional stability and life for the Spa’s structural frame – Protecting and extending the life of your investment even further.

Why Wellis?

High Quality European Production 21st Century Green Technology

Since the company was founded on 2003, more and more people are choosing Wellis products, not only in our home country, but throughout Europe. With the pursuit for a healthy lifestyle, the demand for quality wellness products is on the rise.

Thanks to continuous growth and development, Wellis Magyarország Zrt. is now the largest jacuzzi manufacturer in Europe. As a domestic producer, it is the market leader amongst the wellness equipment manufacturers and distributors of Hungary.
Production of pools and spas happen in two separate departments, in an area of altogether 18.000 square meters (approximately 190.000 square feet), with the involvement of 400 people.
Owing to the significant growth in capacity, every year 20.000 families can enjoy wellness experiences provided by Hungarian-made spas and sanitary-ware!
Every developing company’s history has major milestones. For Wellis, the latest of these came only a few months ago: In December 2105 we opened a 10.000 square meters (approximately 110.000 square feet) large production hall. The building of the complex equipped with enormous, cutting edge manufacturing tools was motivated by the rising demand of the market and the pursuit of quality manufacturing technology.

*Warranty Information

CREDITATIONS

CHECK US OUT

Checkatrade information for UK Hot Tubs Ltd   UK Hot Tub Ltd have been members of Checkatrade since May 2011 and cover Hampshire, Dorset, West Sussex, Portsmouth, Southampton, Winchester, Fareham, Eastleigh, Hedge End, Havant, Waterloovile, Chichester, Bognor Regis and all surrounding areas.

CONTACT US

UK Hot Tubs Ltd, Unit 50, Broadmarsh Business & Innovation Centre, Harts Farm Way, Havant, Hampshire, PO9 1HS

Tel: 02392 471 073

E-mail: info@ukhottubs.co.uk

facebook  twitter  google+  linkedin

UK Hot Tubs are a trading name of UK Hot Tubs Ltd. UK Hot Tubs Ltd are registered in England and Wales, Company registration number – 06836468. UK Hot Tubs Ltd are authorised and regulated by the Financial Conduct Authority (FRN : 782053) We are a credit broker and not a lender. We offer Credit Facilities from one lender. Credit is subject to status, written details on request. Privacy Policy